Windows 10

Step 1

Open your web browser and go to this web page Current Hyas DNS Server List

Please record the 2 nearest DNS addresses from your physical location.

Step 2

Go to the 'Control Panel'


Step 3

Click on 'Network and Internet'.

Step 4

Click on 'Network and Sharing Center'.

Step 5

Click on 'Change Adapter Settings'.

Step 6

If you are using wireless internet: Right click on 'Wi-Fi', and click on 'Properties'.


If you are using ethernet/cable connection: Right click on 'Ethernet', and click on 'Properties'.

Step 7

Click on 'Internet Protocol Version 4 (TCP/IPv4)' and click on 'Properties'.

Step 8

Choose 'Use the following DNS server addresses' and enter the two DNS addresses you on step 1.

REMEMBER!!! Choose these number based on the closet distance to your current physical location. After entering, click 'OK' to save settings.

Step 9

After that, click 'OK' and close everything. Make sure to close all of your browsers to apply the settings as well.

Step 10

Open up your browser and go to to see if your service is active.

If DNS is correctly configured on the device, our website will display a message on the bottom right corner saying "DNS is properly configured for this IP"


Have more questions? Submit a request


Please sign in to leave a comment.